Lateral Body Leaning Side Support for Seating Systems

The Lateral Body Leaning Side Support for Seating Systems can be used for geri or wheelchairs. Lateral Body Supports contain a plastic insert, covered by foam for comfortable support. Choose from covers in nylon, soft synthetic sheepskin, low shear polyester, and stretch fabric. Choose from elevated or non-elevated.

Low shear and sheepskin models reduce skin damaging friction.

To Use
1. Select the correct height for your resident. For small and average sized residents, use the 12 3/4 high support. For tall residents, use the 14" high support. Note: If your resident is seated on a cushion, you may need to use a higher support.
2. Position the Lateral Body Support on the inside of the chair armrest. Place the support on the side of the chair toward which your resident leans. The standard support may be used on either the right or left side of the chair. The elevated arm support must be ordered specifically for right or left leaning residents.
3. Secure the tie cords to the chair.
4. Seat residents as far back in the chair as possible and place the resident's arm in the trough. If additional arm stabilization is required, use the Velcro arm strap.
5. Check resident periodically. Reposition as necessary.

Laundering
The synthetic sheepskin and polyester covers are designed to be removed for laundering. Covers may be washed and dried at temperatures up to 180 degrees F. Bleaching is not recommended. Make certain to remove the Velcro arm strap before laundering. Nylon covers may be cleaned with a mild spray-type cleaner and a damp cloth.