If you are building a custom overhead track, then you might be interested in a GoLift
Ceiling Lift and Connector Set. These sets include everything you need except for the overhead track.
GoLift also offers a
variety of slings that are ideally used with GoLift ceiling lifts.
The Ceiling Lift and Connector Set and Slings are sold separately.
GoLift Video
Track Pieces
Part |
Description |
Regular Track Pieces
|
- 2 5/8" wide (2.625")
- 2 3/8" tall (2.398")
- Available in lengths: 10', 12.5', and 15'
- White powder-coated extruded aluminum
|
Double Track Pieces
|
- 2 5/8" wide (2.625")
- 3 5/8" tall (3.598")
- Available in lengths: 10', 12.5', and 15'
- White powder-coated extruded aluminum
|
Triple Track Pieces
|
- 2 5/8" wide (2.625")
- 5 11/16" tall (5.698")
- Available in lengths: 10', 13', 15', 20', and 26'
- White powder-coated extruded aluminum
|
Curved Track Pieces
|
- Regular Track Size
- 2 5/8" wide (2.625")
- 2 3/8" tall (2.398")
- Curved in degrees of: 30, 45,60, and 90 degrees
- Available in lengths: 73" and 86"
- White powder-coated extruded aluminum
|
*Note: Tracks can be mounted to steel I-beams, wood joists, or concrete. Other methods are also available but should be discussed with a professional to determine feasibility. Refer to the installation manual for more information. Tracks can be used for linear movements or used in conjunction with a manual gantry to allow for 2D motion throughout a room.
Installation Parts
Part |
Description |
Track Brackets
|
- The track should be installed with a minimum of three ceiling brackets to support it. It is recommended that a track bracket be installed every three-feet.
- 3" or 6" brackets
- Single 3" bracket is 2.769" wide
- Double 6" brack is 2.885" wide
|
Track End Stop
|
- Normal or charge
- Portable ceiling lift needs a Normal End Stop
- A Charge Track End Stop is needed for fixed ceiling lifts that have charging strips.
- All tracks need a Track End Stop at each end of their ceiling lift.
|
Track End Cap
|
- Regular, Double, or Triple
- Select the same size as your track (regular, double, or triple)
|
Shim
|
- Available in thickness of: 0.08", 0.375", and 1"
|
Turntable
|
- A turntable is ideal for situations where junctions are required in a track, or when a track turn is required but standard curved sections cannot accommodate it.
- 4-Ports (exits)
- Power or manual
|
Track Charge Strip
|
- A Track Charge Strip is installed inside the track, and the ceiling lift charges when it touches the Track Charge Strip
- Compatible with fixed ceiling lifts only (not portable)
- One strip is made for GoLift Ceiling Lifts with a 400 or 700-pound weight capacity
- Another strip is made for GoLift Ceiling Lifts with a 1,000-pound weight capacity
- Strips are available in multiple lengths
|
XY Gantry
|
- Trolley Set
- Reverse trolley set
|
Transition Gate Assembly
|
- A transfer gate is an H system gate that permits a GoLift Ceiling Lift to travel between an H -System traveling track and a fixed track.
- It is a passive system that does not require an electric charge to engage/disengage.
- Compatible with all three types of tracks.
- Double to regular
- Triple to regular
- Triple to double
|
Installation Tools
|
- Track Bending Tool
- Track Pinning Tool
- Gate Drilling Tool
- You are not required to purchase these tools when installing your track; however, they are very helpful.
|
Free-Standing Track Assembly, Wall-Post Assembly, and Wall-Mounted Bracket Assembly
Part |
Description |
Portable Free Standing Track Unit Assembly
|
- For sale on this page is just a free standing track assembly. It does NOT include a track.
- Compatible with the portable ceiling lift with a 450-pound weight capacity
- Compatible with the fixed ceiling lift with a 400-pound weight capacity
- Compatible with any GoLift trolley
- Compatible with continuous charging, end stop, or handset charging
- No maintenance or service required
|
Wall Post Assembly
|
- For sale on this page is just a wall post assembly that includes mounting hardware. It does NOT include a track.
- When attaching to walls that are not structural walls, a post system is used instead of a wall mount bracket.
- The wall post is attached to the wall, but the anchors used to attach it do not bear any load.
- It can be mounted to non-structural walls, stud walls, concrete walls, and cinderblock walls.
- The wall post can support a track at a maximum height of 10', but it can be modified for lower ceiling heights too.
- Compatible with regular, double, and triple tracks
- Includes Mounting Hardware
- 2 posts per set
|
Wall Mount Bracket Assembly Set
|
- Wall-mounted track systems are typically used when it is not possible to hang from the existing ceiling.
- Wall-mounted brackets can only be attached to structural load-bearing walls.
- The wall brackets are mounted directly to walls (studs) with one on either end of the tracks.
- It can be mounted on wooden studded walls, metal studded walls, and concrete walls.
- Compatible with single, double, and triple tracks
|