Drive Medical Harmony True Low Air Loss Tri-Therapy Mattress System

Harmony True Low Air Loss Tri-Therapy Mattress Replacement System Additional Features:
½ Visual and audio low pressure, power failure, and system failure alarms
½ Silver Stretch Cover is made with permanent silver-ion that kills 99.5% of germs, is fluid resistant, vapor permeable, soft, and supple
½ 2" foam base is included for power outage protection
½ Side loop cable management system reduces tripping hazards
½ Five minute panel lockout feature protects from unintentional setting changes
½ Handy, durable carrying bag included with each system

Harmony True Low Air Loss Tri-Therapy Mattress Replacement System is Ideal for:
½ Home Care
½ Hospital Care
½ Long-Term Care

Control Panel Settings

Comfort Weight Settings Button
This setting controls the air pressure output based on the patient's weight. When the weight setting is increased, the output pressure will increase. When the patient's weight setting is decreased, the air pressure output will decrease.

Therapy Mode Buttons
½ Static: This button redistributes body mass over a greater surface area at a constant air pressure based on your Comfort Weight Setting.
½ Alternating Pressure: 1-in-2 alternating cell cycle achieves periodic pressure relief. There are four selectable cycle times available: 5, 10, 15, 20 minutes. Caregivers can select any of the four cycle times based on patient comfort and desired outcome.
½ Pulsation: This setting encourages lymph and blood flow for increased oxygenation. The entire mattress pulsates between a decreased and increased pressure level in all cells every 15 seconds.
½ Seat Inflate: This feature provides additional support while the patient is in a head raised position (Fowler), ingress, and egress to prevent bottoming out.

Panel Lock
If the panel is not touched for 5 minutes, the panel lock feature will lock the panel and a green LED will display. This feature helps prevent accidental or unintentional setting changes. To unlock, simply press the Panel Lock button for 3 seconds.

Cycle Time
The alternating pressure therapy mode features four selectable cycle times of 5, 10, 15, and 20 minutes. By pressing the Cycle Time button, the user can select one of the four cycle times based on patient comfort and desired outcome.

Alarm
Alarm Mute
This button temporarily stops the alarms for low pressure, power failure, or system failure. If the problem continues, the alarm will resound within 3 minutes to notify the caregiver until resolved.
½ Low Pressure Indicator: If the Quick Connector becomes disconnected, the lower pressure LED Indicator will light up and the low pressure alarm will activate. This alarm may sound within 20 seconds. Once the low pressure problem is resolved, the control unit will resume operation in the previously set mode. If air cells are purposely disconnected, the low pressure indicator will not be detected.
½ Power Failure Alarm: If a power failure occurs, the Power Failure LED indicator will light up and the Power Failure alarm will activate immediately. The alarm mute button deactivates the Power Failure Alarm.
½ System Failure: If the system fails, the System Failure LED indicator light will light up.

AutoFirm/Nursing Key
If the power switch is turned on, the system will go into Auto-Firm mode automatically. This feature ensures that the Control Unit reaches it maximum operating pressure. Once the maximum pressure is reached, the control unit will automatically switch to the previously selected comfort level in Static mode. The user can also press the therapy modes button to return to the previous mode. This feature can be used as full mattress inflation during ingress and egress or normal nursing procedure for better support.