Voyager Lightweight Portable Ceiling Lift

Voyager® Portable Lift

• Two Button Handset Included
• Rechargeable and Removable Battery - gives 30 lifts per full charge.
• Quick Release Strap
• Emergency Stop and Lower
• Dual Controls
• Audible Low Battery Indicator
• Patented Safety Systems

FEATURES - Easytrack®:

• Easy set-up: The lightweight components and design allow for quick easy set-up by a single person in less than 5 minutes.
• Portable: Lightweight aluminum can be transported along with the Voyager lift providing a temporary solution when traveling.
• Non-permanent Installation: The unique floor-to-ceiling spring-loaded design does not require permanent installation or alterations to the ceiling or electrical, thus saving the homeowner considerable money while maintaining the decor of the home.
• Easy-glide, Telescopic Rail: The design of the telescopic rail allows caregivers to smoothly glide the person being transferred without strain or risk of back injury.
• Telescopic Post allows the Easytrack® to be used with ceiling heights from 7 ft. - 9 ft.
• Small Footprint: The small feet of the Easytrack™ allow use even in the smallest bedroom or bathroom where a conventional floor lifter could not be maneuvered.
• Patented safety systems.
• Wall Requirements:
  WOOD STRUCTURE - minimum 2" X 3" Studs
  CONCRETE STRUCTURE
  • Do no install if wall does not meet requirements.
  • Do not install on a wall with a steel structure.

TRACK SPECIFICATIONS:

• Ceiling Height Range 84" - 108"
• Rail Length Range 74" - 124.5"
• Total Weight 44 lbs
• Rail Weight (each) 26.4 lbs
• Post Weight (each) 8.8 lbs 

Easytrack® 2 Post Configuration: The 2 post configuration is ideal for a simple lift in or out of a bed. It allows the person to be moved in one direction along the rail. Also available with a tub bracket which allows one post to be mounted on to a bathtub ledge (minimum 3" ledge at ends required).

Easytrack® 3 Post Configuration: The 3 post configuration provides access in two directions, allowing lifts or transfers anywhere within the triangle area. Can work great in bathrooms allowing access to tub, sink , and toilet. Also available with a tub bracket which allows one post to be mounted onto a bathtub ledge (minimum 3" ledge at ends required).

Easytrack® 4 Post Configuration: The 4 Post system operates like a traditional x-y system, allowing for complete coverage anywhere within the 4-post area. The 4 post system is not telescopic.

Bath Mount must rest on the back edges of the tub.  Tub must be between 53" - 65" length to work or attach the 3 post Easytrack to a wall instead of a post.

	1. CLICK the pieces together and slide the post up to the ceiling. 2. TWIST the post to tighten it into place. 3. LOCK the rail onto one post.
	4. EXTEND and lock the rail onto the other post.   5. FINISH by placing the protective strips and end caps on the posts.
Get full room coverage with our 4-post system. The center rail moves back and forth allowing you to cover the entire area between the posts.	Note: • No tools required • No contractors required • Fits most Standard ceilings in your home
Bath post and base provide safe transfers into bath.	2 Post EasyTrack® includes: Extendable rail with trolley, 2 Standard posts, 2 Top plates, 2 Foot plates, Rail caps and finishing strips
3 Post Bath System	Attach the 3 post Easytrack System to a wall instead of a post for more flexibility.
	Need more room to transfer? Try our unique 3 post system. Pivoting rail moves from side to side.
	What if installing a ceiling track is not an option? Our Easytrack system gives you the same security as a permanent installation.