SportsPlay's Stand Alone Shade Structure is a low maintenance solution to providing overhead shade. Ideal for using over playground equipment or as a shelter from the sun, the shade keeps playground equipment cool and blocks UV rays. It can be used over a variety of areas, including bleachers and picnic areas. The UV stabilized shade structure is made with knitted fabric and high density polyethylene, and it is lock-stitched. The shade will not fade, mold, or rot. It blocks up to 95% of UV rays. The posts are made with galvanized steel, which resists corrosion.
The Stand Alone Shade Structure is available in three different sizes: 12' x 20', 18' x 20', and 20' x 24'. Choose from Red, Green, Blue or Yellow in each size. The Shadenet Canopy, cable, and hardware needed are all included. The concrete required for the project needs to be sourced locally by the contractor. Use normal post pre-mix bagged concrete, available from building material outlets.
Base product HDPE G.F. 7740.72 - only raw material is used
Playground Mounted Shade Structure Specifications:
- Base product HDPE G.F. 7740.72 - only raw material is used
- Monofilament round yarn - 350 Dernier/ 0.21mm
- Breaking strain - 1.8 kg. Tested individually
- Elasticity of Both - 25 to 30%
- Knitting pattern - max 6 needles/ inch. Lock stitched on weft and knitting bar
- Weight to burst ratio - Exceeds SABS 1703 spec
- UV stabilizer in end product - 0.8% effective
- Warp tear test avg - 100 kg, Elongation - 50%
- Weft tear test avg - 210 kg, Elongation - 25%
- Burst Strength - 260 kPA
- Fabric Mass - =/- 195 gram/ m2 (=/-5%)
Weatherability
Hindered amine light stabilizers
Chimasorb 944 for all colors except black
Minimum Chimasorb 944 is .8% effective
Carbon black particle size 22mm, minimum 2.5% effective
All colors are pigmented with a light fastness of 7 to 8, which has the highest resistance to fading
Shade and UV Percentages
Forest Green: Shade : 70% UV Protection: 90%
Royal Blue: Shade: 90% UV Protection: 94%
Yellow: Shade: 70% UV Protection: 91%
Red: Shade: 84% UV Protection: 83%
Steel Tubing and Wire Cabling
Round tubing with a wall thickness which exceeds 2mm. Grade 300 WA, Cold formed welded and seamless carbon steel tubing in accordance with ASTM A 500. 3" OD. Galvanizing -55 microns minimum.
Components and Fittings
Standard Height is 8' on the outside perimeter, 10' in the middle. Grade 300 WA Flat Bar. Hot dipped to 55 microns minimum. Bolts and Nuts high and std tensile galvanized bolts, BSP treated in metric size. All nuts are nylock type.