QuattroPower Short Bathtub Support Grab Bar by Mobeli

SKU #: CHC-R1400263S

RMID: 50137

Brand: Clarke Healthcare

The QuattroPower Short Bathtub Support Grab Bar
Short Bathtub Support Grab Bar
Can be used with a mirror
Has various uses
Ideal for bathtubs and showers
Also ideal for toilets
Configuration allows for many different positions

Strengthened grab bar allows for up to 176 pounds of pull weight

FREE SHIPPING!

Category: Bath Tub Rails

This bar can be extended up to 28" long and can be configured in a variety of ways to allow a person to easily enter, sit, rise and step out of their tub without falling.

Four 5 ½ inch suction pads distribute more weight for higher capacity
Can be mounted well either on inside or outside the edge of the tub
The 28 inch long bar spans the width of the tub
The suction cups easily lock into place with a snap lock
A grip horn extension makes it easier to grasp and enter the tub

Select Product Options

List Price: ~~$972.16~~

Starts At: $730.95 (Save 25%)

Instant Discount Available!
Click Here To Activate

FREE SHIPPING
Shipping Info

Rehabmart ID: 50137

MPN: R1400263S

Brand: Clarke Healthcare

Rehabmart is an authorized Clarke Healthcare dealer!

Want A Quote?

Question About This Product?

Financing Options:
Consumer Financing available

Product Overview:

The QuattroPower Short Bathtub Support Grab Bar by Mobeli can be attached strategically to walls inside and outside the tub and is designed to enable a person to maintain balance and stability while entering and exiting a tub, preventing slips and falls in the bathtub or shower area. With three swivel points that allow a number of safely grabbable configurations, the 28-inch grab bar will span the tub or stretch across wall corners to provide the best place to grab while entering the tub or while taking a shower. It has two pairs of 5 ½-inch suction cups that will steadfastly hold the grab bar to most facility wall surfaces. It is lightweight, compact, and very easy to assemble/disassemble which makes this an ideal grab bar to take on vacations or visits.

This product is non-returnable.

Product Specifications / Dimensions

Specifiction Label	Specification Value
Length	28.8"
Width	10.9"
Height	12.1"
Product Weight	7.8 lbs.
Latex	No
Product Assembly	Yes
Primary Material	Plastic
Primary Color	White
Weight capacity	176 lb

Product Options:

Styles Available

The extension enables safer grasping. It prevents rotating of the body when stepping out.

Additional Documentation on This Product

QuattroPower Short Bathtub Support Grab Bar: PRODUCT MANUAL

QuattroPower Short Bathtub Support Grab Bar: Brochure

More Information

The QuattroPower Short Bathtub Support Grab Bar by Mobeli is a strong and sturdy grasp bar that allows a person to easily enter, sit, rise and step out of the tub without fear of falling. Very easy to install, this multi-usable support grab bar has three swivel points that can be attached inside and outside of the tub or in a shower area. The QuattroPower grab bar has dual suction pads that can support up to a 176-pound weight based on weight-bearing while standing, lowering to sit, rising, and in case of a slip or fall.

The 28.8-inch grab bar can span across the tub and will support high pull and vertical loads with ease. A grip horn piece extends beyond the end to provide for more support when entering the tub. Four large 5 ½-inch diameter suction pads, two on each side of the ends of the grab bar can be placed onto a smooth flat surface and easily locked into place with a snapping lock located on each side of each suction cup. The grab bar can be configured in a number of ways to provide the best support at the correct place. When not in use, disconnect one end of the bar and let it dangle in a vertical parked position or just easily and quickly remove it from the wall and store it safely away until it is needed next time. The lightweight of the grab bar (7.8-pounds) combined with the compact size and portability means it can be assembled easily with snap buttons and as easily disassembled for travel.

The grab bar will mount to a wall inside the tub or outside the tub with the suction cups securely adhering to a smooth surface. Each 5 ½-inch diameter pad needs an area that is smooth, free of cracks or seams. A facility with new construction that has only a few coats of paint will allow the suction pad to suck air through the plasterboard or drywall and the suction pads will not securely hold and may even pull the paint off a wall, but a surface made with natural stone, clay or cultured marble which has a not been coated with sealant will allow the suction pads to suck air and release. Also, a textured surface, whether cement, stone, tile, or plaster will not hold the suction pad.

What Customers Are Saying:

"I had my daughter in law get these grab bars for me for some extra help in the bath because to be perfectly honest, my arms aren't what they used to be. The bars are smooth and have a soft feel to them, like grabbing a bed post. They also hold more weight than they look like they do, which has helped me so much. Thanks to my daughter in law I no longer have to worry about falling in the bathtub. - Francine Y."

"I recently had a family member fall and break their arm in an accident, and they were having significant troubles getting in and out of the shower. I told my occupational therapist about it and they recommended that I get my family member this grab bar. Well I'm glad I did that because I tried these bars out for myself before I gave them away, and they are fantastic. The bars help support you in areas you wouldn't even expect to need them and they hold a good bit of weight. Definitely gonna buy some for myself. - Natalie P."

"These really are some excellent assist bars. I'm thinking about replacing the ones we already have with these and just seeing what the wife thinks. They do their job pretty well and it looks good in the bathroom. I would undoubtedly recommend these grab bars. - Raymond F."

Related Products & Accessories:

FAQ For QuattroPower Short Bathtub Support Grab Bar by Mobeli

? Have a question about this product? Click here to ask us!

How much weight do these Short Bathtub Support Grab Bars support?

Answer: These grab bars are capable of supporting approximately up to 176 pounds of weight.

What are these Short Bathtub Support Grab Bars made of?

Answer: These particular grab bars are made of plastic. There is another variation of this item that is made of PVC piping, which is available if needed.

Is there any latex in these Short Bathtub Support Grab Bars?

Answer: No, this product is completely latex free.