Molift Quick Raiser 205 Sit-to-Stand Patient Lift

Product Overview:

The Molift Quick Raiser 205 Sit-to-Stand Patient Lift assists less mobile patients with achieving an upright position without manual lifting from their caregiver. The inclined mast provides a more natural motion while the compatible slings ensure the patient is properly supported. Knee pads and ergonomic handles ensure the patient feels secure and in control throughout the process. Dual-ergonomic-caregiver-handles provide precise control over direction; the low width-adjustable chassis allows the lift to be positioned flush with wheelchairs, beds, toilets, and more for smooth transfers. All operations are controlled either on the lift mast control panel or simple handset.

This product was featured in the following articles:

How to Choose the Best Sit-To-Stand Lift

This product is non-returnable.

Product Specifications / Dimensions

Total Weight

98 lb

Chassis Weight

38 lb

Maximum User Weight

451 lb

Length

4.25 ft

Chassis Width

2.03 ft

Leg Height

2.95 in. / 3.94 in

Battery

24 V 2.9 Ah

Battery Charge Time

6 hours

Hoisting Speed for 165 lb.

1 3/8 in. per second

Rated Performance

100 hoists at 165 lb

Service Software

Included

Material

Aluminum, steel, composites

Additional Documentation on This Product

Molift Quick Raiser 205 User Manual

Molift QuickRaiser 205 Product Sheet

Dimensions

More Information

The Molift Quick Raiser 205 Sit-to-Stand Patient Lift features an inclined lift mast designed to mimic natural movement for the patient; the optional slings can be used to further support the patient during transition. The width-adjustable chassis with low clearance allows caregivers to position the lift flush with a bed, wheelchair, or toilet for a smooth and even transfer. Padded knee rests provide resistance to assist with knee extension or flexion while the curved handles give patients a variety of grip options.

Caregivers will appreciate the three pairs of casters that grant the lift excellent maneuverability, as well as the dual U-shaped handles designed for comfortable and precise directional control. The raising and lowering motion is controlled either on the control panel of the lift mast or via a user-friendly handset that connects to the lift mast with a long coil cord; the cord extends enough to allow caregivers to remain reassuringly close to the patient at all times without ceding control of the lift at any point. The eco-friendly NiMH battery is rechargeable, and the control panel features a warning indicator to alert caregivers if the battery power gets too low.

4 Point Active Lifting Arm Quick Raiser

*Available with either 75 mm or 100 mm Casters

4 Point Active Lifting Arm Quick Raiser with Sling

*Slings available in many sizes

*Slings sold separately

2 Point StandUp Lifting Arm Quick Raiser

*Available with either 75 mm or 100 mm Casters

2 Point StandUp Lifting Arm Quick Raiser with Sling

*Slings available in many sizes

*Slings sold separately

FAQ For Molift Quick Raiser 205 Sit-to-Stand Patient Lift

? Have a question about this product? Click here to ask us!

What is the height limit?

Answer: The manufacturer has a standard height limit of 6-foot 2-inches with a 375-pound weight limit. Customers have reported success with a client who is 6-foot 6-inches. We do not recommend going outside of the manufacturer's recommendations, however, how you use the product is up to your discretion and may invalidate any warranty.

Is a sling required for this lift?

Answer: Yes, for the Active Raiser you would be required to purchase the Active sling, which is a 4 point sling.
For the Stand Up Raiser, you could purchase the older RGO sling, which is a 2 point sling.