Portable Teak Wood Bathtub Bench - ADA Compliant Clamp-On Tub Seat with 250 lbs. Weight Capacity
Clamps to the tub wall with ease
Easily folds up and out of the way
| Width | 26.5" |
| Depth | 15" |
| Height (Adjustable) | 17" - 19" |
| Weight Capacity | 250 lbs |
| Manufacturer Warranty | 5 Year |
| INSTALLATION INSTRUCTIONS | |
| STEP 1 |
Determine desired tub seat location. The seat must be located on the bathtub so that the swing-down legs are perpendicular to the Tub Bench, and that the leveling feet are positioned on a clean, FLAT surface. Swing down the legs 90° until the "Locking Pin" snaps through the whole in the leg bracket, into its stopping position. The legs will be locked in their "down" position. |
| STEP 2 |
Determine seat height from the floor and location relative to the tub and bathroom finished floor. ADA guidelines advise a finished seat height of 17" to 19" above the bathroom finished floor. Place the tub clamp over the front of the tub ledge. Level and lock the adjustable feet. Tighten the Tub Clamp to secure the seat onto the tub ledge. Do NOT over-tighten the Tub Clamp, which may distort the Tup Clamp Bracket. |
| STEP 3 |
Check bench for the following: 1. Correct finished height. 2. Tub Clamp properly secured on tub ledge. 3. "Swing-down legs" locked in down position at 90°, perpendicular to the tub floor. 4. The rubber leveling feet must be positioned on a FLAT surface to the tub floor. (Not resting on the radius corner of the tub.) |
| Storing the Bench |
• Loosen clamps and remove the bench. • Push the spring clip in FIRST, then fold legs. |
.jpg&maxheight=200&quality=40&product_name=ADA+Compliant+Portable+Clamp-On+Tub+Seat "ADA Compliant Portable Clamp-On Tub Seat")
