MENU CART (0)
Financing Options:
Consumer Financing available
Product Overview:

The M200 Fall Monitoring System provides an ideal solution for standardizing fall prevention management. With its ability to monitor 2 fall prevention sensor pads at once, greater safety is achieved. The system can run on AC power or on batteries, which enables residents to remain mobile in a wheelchair while being monitored.

Caregivers can customize the adjustable-volume alarm in multiple ways, including with 4 different pre-set audible alarms, a recorded alarm specifically tailored for the patient, or by routing the alarm to a nurse-call system that eliminates the need for audible alarms at the bedside.

Compatible with all Bed-Check and UMP sensor pads.

System does not include sensor pads. Must be purchased separately.


This product is non-returnable.
Note: This product is for sale in the United States only and is ineligible for International Shipping.

Product Options:

Choose M200 Fall Monitoring System

M200 Fall Monitoring System
$270.11
sku: MTN-FM2000

Choose M200 Fall Monitoring System Accessories

Fully Closed Battery Compartment Cover
$36.50
sku: MTN-BDC-1000

Choose Bed-Check Sensormat Cordless Bed Pad

14-Day Bed-Check Sensormat Cordless Bed Pad
$63.23
sku: MTN-74050
180-Day Bed-Check Sensormat Cordless Bed Pad
$76.31
sku: MTN-74060

Choose Bed-Check Sensormat Cordless Chair Pad

14-Day Bed-Check Sensormat Cordless Chair Pad
$53.73
sku: MTN-73050
180-Day Bed-Check Sensormat Cordless Chair Pad
$66.28
sku: MTN-73060

Choose UMP Sentry Fall Prevention Sensor Pads

45-day Chair Sensor Pad - 7" x 15"
$49.33
sku: MTN-93010
45-day Bed Sensor Pad - 10" x 30"
$56.39
sku: MTN-92010
180-day Chair Sensor Pad - 7" x 15"
$63.48
sku: MTN-93020
180-day Bed Sensor Pad - 10" x 30"
$70.07
sku: MTN-92020

Additional Documentation on This Product

More Information

2 Pads can be Connected to 1 Monitor
With the ability to connect 2 pads to 1 monitor, the M200 makes it possible to have multiple places throughout the patient room that are monitored. For instance, a sensor pad can be set up on a Geri chair or wheelchair, as well as on the bed. These at-risk monitored locations save time with setups that usually involve disconnecting and reconnecting pad cords. The ability to monitor multiple locations also increases safety.

Customizeable Delay Settings
The alarm delay settings can be configured between 0 to 2 seconds, depending on preferences. This ability to change the delay settings reduces alarm fatigue and the occurrence of false alarms.

Standardized Fall Prevention
Because the M200 accommodates up to 2 pad sensors, there's no need to purchase multiple systems, and each monitor can be configured to accommodate the patient's individual needs.

Multiple Power Settings
The M200 can operate on battery or electric power. Using the battery mode allows for residents to travel with the M200 on their wheelchair, enhancing protection while mobile. The fall prevention alarm unit can be connected to electric power while in-room to save batteries.

System Reset Choices
When the M200 alarm sounds, the system can be configured to automatically reset, or the system can be set to only reset when a staff member has checked and reset the monitor.

Tamper Resistance
A tamper resistant and easy-access settings panel and battery compartment cover are available with the M200.

Hold and Suspend Modes
When patients need to get up from the sensor pad, there are 2 modes that can be used to help reduce the likelihood of triggering a false alarm. The "Suspend" mode, which suspends the alarm for 2 minutes, can be used when making the transfer. When the transfer is complete, the "Hold" mode can be used, which gives an extra 30 seconds before an alarm sounds.

Nurse Call Integration
The M200 integrates with most e-call systems, which sounds the audible alarm at the nurse's calling station instead of at the bedside. This capability creates a more peaceful in-room environment and eliminates alarm fatigue, which can often irritate patients.

Audible Alerts
Choose from a variety of alarm sounds and volumes with the M200. There are 4 different pre-set audible alarms available to choose from, and a record feature lets you personalize the alarm for each patient. The volume can be set to Low, Medium, or High volume levels. There is also the capability of rerouting patient alarm signals to the nurse-call system, allowing for a silent alarm at the bedside.

Multiple Mounting Options
A variety of mounting options allows the M200 to be mounted to a chair, wall, bed headboard, toilet, or wheelchair.

Visual Alerts
LED indicator lights in Red, Green, and Amber show when the patient is actively being monitored and when the system is not monitoring.

Compatible Accessories
A variety of Sensormat alarm sensor pads can be used with the M200, including one for beds, chairs, toilets.commodes, and floor pads. Compatible seat belts alert caregivers when the patient has unlatched their wheelchair seat belt.

Regulatory Safety Compliance
The M200 is ETL listed to UL standards and meets requirements of the RoHS Directive and other application US and EU standards.

Key Features:
½ 4 Alarm settings
½ 4 Alarm Tones
½ Voice Recording
½ Display Intensity
½ Manual and Automatic System Reset


FAQ For M200 Standardized Patient Fall Monitoring System

? Have a question about this product? Click here to ask us!

M200 Standardized Patient Fall Monitoring System Pictures:

M200 Standardized Patient Fall Monitoring System
M200 Standardized Patient Fall Monitoring System
Pictured operating on electric power.
Pictured operating on electric power.
M200 attached to the bed frame.
M200 attached to the bed frame.
M200 Pictured on wheelchair belt.
M200 Pictured on wheelchair belt.
M200 pictured on a headwall.
M200 pictured on a headwall.
M200 pictured facing right.
M200 pictured facing right.
M200 pictured facing left.
M200 pictured facing left.
M200 pictured with the lights on.
M200 pictured with the lights on.
Ideal for use in senior living facilities.
Ideal for use in senior living facilities.
Can be used to protect resident while in bed.
Can be used to protect resident while in bed.
Can be used to protect resident while in a side chair.
Can be used to protect resident while in a side chair.
Can be used with 2 sensor pads at once.
Can be used with 2 sensor pads at once.
Includes a Hold mode for transfers.
Includes a Hold mode for transfers.
Includes voice recording capabilities.
Includes voice recording capabilities.
M200 pictured on back of wheelchair.
M200 pictured on back of wheelchair.
Choose from a tamper-resistant or easy-access cover.
Choose from a tamper-resistant or easy-access cover.
Resetting the alarm.
Resetting the alarm.